Use Dritz Home curtain grommets to transform a piece of fabric into a curtain panel.
The grommets are easy to install and create a series of openings in which to insert a curtain rod and make your panel ready to hang.
- ECONOMICAL – make your own DIY curtains by installing Dritz Home grommets into any piece of fabric
- FASHIONABLE – trendy color options and styles are available for coordinating with your favorite fabric colors and prints
- EASY TO USE – simply snap grommet rings together – no tools are required; a template is included for perfect placement on a surface
- VERSATILE – Can be used with a variety of fabric weights, from sheer to drapery-weight fabrics
- ACCOMMODATES MANY ROD SIZES – fits rods up to 13/16-inch (2.06 cm) diameter
Available Colors:- Matte Black
- White
-
Brushed Silver- Matte Gold
- Brass
- Bronze
- Pewter
- Antique Gold
- Champagne
- Copper
Quantity: 8 Sets p/Package
Size: 1-9/16" (39.6 mm) interior diameter, 2-3/8" (60.3 mm) exterior diameter
Instructions:
- Finish the top of the curtain with a 4″ or larger header.
- Measure the finished width of the curtain. Divide measurement by the number of grommets. This will be the spacing measurement. TIP: Use an even number of grommets.
- At the top of the curtain, mark the center of 1st grommet at ½ of spacing measurement from the side edge of the curtain.
- Continue marking grommet centers across the top of the curtain at full spacing measurement. The last grommet center will be ½ of spacing from the other edges.
- Position template over center marks and trace slots; cut out holes.
- Place raised center of the grommet in the hole from the right side.
- On the wrong side, position the “prong” side of the grommet over the raised center. Using the palm of your hand, press down to secure.
TIP: To remove grommets, insert a flat screwdriver tip into the slot and lift up.
* Machine washable. * Do not iron, tumble dry or dry clean.
