E6000® Plus Crystal Clear All-Weather Adhesive (1.9 fl oz)

This E6000® Plus Crystal All-Weather adhesive is perfect for all your indoor and outdoor home décor projects.

It’s formulated using premium polymer technology and can be used on almost any substrate and in just about any application. The waterproof formula and all-weather performance make E6000 PLUS ideal for indoor and outdoor applications. Excellent adhesion to wood, glass, fabric, ceramic, gems, metal, marble, fiberglass, concrete, most plastics, Lexan, and much more.

Odorless and easy to use, this adhesive bonds to wood, glass, fabric, ceramic, and various other surfaces.

Features:

• For indoor and outdoor applications 
• Crystal clear
• Odorless
• Multi-surface
• Conforms to ASTM D-4236
  
  

Instructions:
Follow these step-by-step directions when using E6000 PLUS:

- Read directions and test small areas for adhesion before use.
- The surface should be clean, dry, and free of dirt.
- For best adhesion on smooth, non-porous materials, lightly roughen the surface before use.
- The ideal application temperature range is 50 to 90 ºF (10 to 32 ºC).
- Once fully cured, the adhesive can withstand temperatures from -40 to 200 ºF (-40 to 93 ºC) intermittently.

• Puncture seal in neck of tube using pointer cap.
• Apply directly to surfaces to be bonded or repaired.
• NOTE: For non-porous surfaces, apply adhesive, mate surfaces together, pull apart for 5 minutes, then re-mate surfaces permanently.
• To close the tube properly, remove air in the tube by squeezing the product slightly past the end of the opening, then tightly recap. Dried products can easily be removed.
• Allow 24 hours for full cure. Depending on substrates and temperature, maximum bond strength may not be reached for up to 72 hours.
• Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone, or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping.
• Not recommended for use on acrylic, vinyl, foam, polyethylene, and polypropylene.
• Store in a cool, dry place.

Note:

• May damage finished surfaces.
• Avoid such contact until completely dry.
• Not recommended for use on polystyrene, polyethylene, polypropylene, Styrofoam™ or paper products.
• Not recommended for any items that come into contact with food, drinking water or animals.
• Do not dry clean.